Load data for .32 ACP (7.65 Browning) + .312 | 100gr | Speer JHP

Recommended Powder(s):

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.312 \| 100gr \| Speer JHP
Manufacturer SKU:	3981
Bullet Weight:	100gr \| 6.5g
Bullet Diameter:	0.312" \| 7.92mm
Bullet Length:	0.560" \| 14.2mm
Caliber:	.32 ACP (7.65 Browning) load data
Case Length (l3):	0.677" \| 17.2mm
Cartridge Length (C.O.L.):	0.969" \| 24.6mm
Seated Depth:	0.268" \| 6.8mm
Shank Seated Depth:	0.268" \| 6.8mm
Case Capacity:	9.3 Grains of Water \| 0.60 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	23206 psi \| 1600 bar
LID:	LID_B6184_C409
Last updated:	2025-01-01

Load data for 74 loads in caliber .32 ACP (7.65 Browning) with .312 | 100gr | Speer JHP bullet and 37 powder(s). The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 70N	<<locked>>	75%	19043	82%	**9	98%
ADI APS 350	<<locked>>	69%	19305	83%	**8	100%
ADI APS 450	<<locked>>	71%	18811	81%	**1	100%
ADI AS 30	<<locked>>	79%	19392	84%	**4	100%
ADI AS 50N	<<locked>>	77%	19508	84%	**0	100%
[Accurate No. 2]*	<<locked>>	80%	19406	84%	**0	87%
Accurate Solo 1000	<<locked>>	74%	17956	77%	**4	100%
Accurate Solo 1250	<<locked>>	89%	19232	83%	**6	97%
Alliant BULLSEYE	<<locked>>	74%	18275	79%	**0	92%
Alliant UNIQUE	<<locked>>	89%	18188	78%	**6	91%
Baschieri & Pellagri 100	<<locked>>	82%	19058	82%	**4	100%
Hodgdon Clays	<<locked>>	69%	19464	84%	**8	100%
[Hodgdon Longshot]*	<<locked>>	73%	20131	87%	**9	83%
Hodgdon Universal	<<locked>>	83%	19043	82%	**9	98%
Lovex S011	<<locked>>	66%	18144	78%	**7	98%
Lovex S020	<<locked>>	83%	18492	80%	**6	94%
Maxam CSB 1	<<locked>>	90%	18173	78%	**7	97%
Maxam CSB 2 👍	<<locked>>	94%	18202	78%	**9	100%
Maxam CSB 3	<<locked>>	85%	19334	83%	**0	100%
Maxam CSB 4	<<locked>>	80%	18623	80%	**0	100%
Maxam CSB 5	<<locked>>	75%	19290	83%	**4	100%
[Ramshot Silhouette]*	<<locked>>	75%	19725	85%	**3	89%
ReloadSwiss RS 12 👍	<<locked>>	86%	20566	89%	**9	100%
ReloadSwiss RS 20	<<locked>>	92%	17651	76%	**3	92%
Rottweil P 801	<<locked>>	76%	19914	86%	**3	100%
SNPE Vectan A0	<<locked>>	89%	19014	82%	**3	90%
SNPE Vectan BA 9	<<locked>>	83%	20407	88%	**3	96%
SNPE Vectan BA10	<<locked>>	66%	18797	81%	**1	100%
SNPE Vectan BA9 1/2	<<locked>>	82%	18623	80%	**0	97%
Somchem MP200	<<locked>>	84%	19551	84%	**9	90%
Somchem MS200	<<locked>>	88%	20233	87%	**6	93%
[Vihtavuori 3N37]*	<<locked>>	96%	19406	84%	**6	83%
Vihtavuori N320 👍	<<locked>>	84%	19711	85%	**0	100%
Vihtavuori N32C Tin Star	<<locked>>	90%	11806	51%	**5	100%
Vihtavuori N330	<<locked>>	88%	19276	83%	**9	99%
Vihtavuori N340	<<locked>>	87%	17869	77%	**7	91%
Winchester 231 👍	<<locked>>	70%	20291	87%	**6	99%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 70N	<<locked>>	63%	13808	59%	**8	94%
ADI APS 350	<<locked>>	60%	15490	67%	**3	100%
ADI APS 450	<<locked>>	63%	15345	66%	**2	100%
ADI AS 30	<<locked>>	64%	13169	57%	**9	100%
ADI AS 50N	<<locked>>	63%	13605	59%	**5	98%
[Accurate No. 2]*	<<locked>>	68%	13750	59%	**5	81%
[Accurate Solo 1000]²	<<locked>>	59%	12125	52%	**3	97%
Accurate Solo 1250	<<locked>>	69%	11414	49%	**6	90%
[Alliant BULLSEYE]*	<<locked>>	62%	13053	56%	**8	86%
[Alliant UNIQUE]*	<<locked>>	70%	11516	50%	**9	83%
Baschieri & Pellagri 100	<<locked>>	62%	10936	47%	**3	94%
Hodgdon Clays	<<locked>>	60%	15418	66%	**2	100%
[Hodgdon Longshot]*	<<locked>>	69%	17709	76%	**0	81%
Hodgdon Universal	<<locked>>	64%	11690	50%	**5	92%
Lovex S011	<<locked>>	60%	15069	65%	**1	96%
[Lovex S020]*	<<locked>>	65%	11037	48%	**2	85%
[Maxam CSB 1]*	<<locked>>	69%	10849	47%	**9	89%
Maxam CSB 2	<<locked>>	67%	9007	39%	**6	94%
Maxam CSB 3	<<locked>>	64%	11313	49%	**6	95%
[Maxam CSB 4]²	<<locked>>	58%	10443	45%	**9	96%
Maxam CSB 5	<<locked>>	60%	12691	55%	**2	100%
[Ramshot Silhouette]*	<<locked>>	61%	12705	55%	**5	81%
ReloadSwiss RS 12	<<locked>>	61%	9950	43%	**9	98%
[ReloadSwiss RS 20]*	<<locked>>	73%	11226	48%	**2	83%
[Rottweil P 801]²	<<locked>>	58%	11690	50%	**2	100%
[SNPE Vectan A0]*	<<locked>>	70%	11893	51%	**2	82%
[SNPE Vectan BA 9]*	<<locked>>	65%	12734	55%	**2	89%
[SNPE Vectan BA10]²	<<locked>>	59%	15345	66%	**2	100%
[SNPE Vectan BA9 1/2]*	<<locked>>	63%	11327	49%	**9	89%
[Somchem MP200]*	<<locked>>	67%	12662	55%	**8	82%
[Somchem MS200]*	<<locked>>	63%	10791	47%	**9	82%
[Vihtavuori 3N37]*	<<locked>>	90%	16926	73%	**3	81%
Vihtavuori N320	<<locked>>	63%	10979	47%	**9	98%
Vihtavuori N32C Tin Star	<<locked>>	82%	9790	42%	**3	100%
[Vihtavuori N330]*	<<locked>>	63%	9761	42%	**9	89%
[Vihtavuori N340]*	<<locked>>	68%	10849	47%	**6	82%
Winchester 231	<<locked>>	60%	14475	62%	**5	95%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.